Testing stores

Stores will, by design, be used at many places and can make testing much harder than it should be. Fortunately, this doesn't have to be the case. We need to take care of three things when testing stores:

The pinia instance: Stores cannot work without it
actions: most of the time, they contain the most complex logic of our stores. Wouldn't it be nice if they were mocked by default?
Plugins: If you rely on plugins, you will have to install them for tests too

Depending on what or how you are testing, we need to take care of these three things differently.

Unit testing a store

To unit test a store, the most important part is creating a pinia instance:

// stores/counter.spec.ts
import { setActivePinia, createPinia } from 'pinia'
import { useCounterStore } from '../src/stores/counter'

describe('Counter Store', () => {
  beforeEach(() => {
    // creates a fresh pinia and makes it active
    // so it's automatically picked up by any useStore() call
    // without having to pass it to it: `useStore(pinia)`
    setActivePinia(createPinia())
  })

  it('increments', () => {
    const counter = useCounterStore()
    expect(counter.n).toBe(0)
    counter.increment()
    expect(counter.n).toBe(1)
  })

  it('increments by amount', () => {
    const counter = useCounterStore()
    counter.increment(10)
    expect(counter.n).toBe(10)
  })
})

// stores/counter.spec.ts
import { setActivePinia, createPinia } from 'pinia'
import { useCounterStore } from '../src/stores/counter'

describe('Counter Store', () => {
  beforeEach(() => {
    // creates a fresh pinia and makes it active
    // so it's automatically picked up by any useStore() call
    // without having to pass it to it: `useStore(pinia)`
    setActivePinia(createPinia())
  })

  it('increments', () => {
    const counter = useCounterStore()
    expect(counter.n).toBe(0)
    counter.increment()
    expect(counter.n).toBe(1)
  })

  it('increments by amount', () => {
    const counter = useCounterStore()
    counter.increment(10)
    expect(counter.n).toBe(10)
  })
})

If you have any store plugins, there is one important thing to know: plugins won't be used until pinia is installed in an App. This can be solved by creating an empty App or a fake one:

import { setActivePinia, createPinia } from 'pinia'
import { createApp } from 'vue'
import { somePlugin } from '../src/stores/plugin'

// same code as above...

// you don't need to create one app per test
const app = createApp({})
beforeEach(() => {
  const pinia = createPinia().use(somePlugin)
  app.use(pinia)
  setActivePinia(pinia)
})

import { setActivePinia, createPinia } from 'pinia'
import { createApp } from 'vue'
import { somePlugin } from '../src/stores/plugin'

// same code as above...

// you don't need to create one app per test
const app = createApp({})
beforeEach(() => {
  const pinia = createPinia().use(somePlugin)
  app.use(pinia)
  setActivePinia(pinia)
})

Unit testing components

This can be achieved with createTestingPinia(), which returns a pinia instance designed to help unit tests components.

Start by installing @pinia/testing:

shell

npm i -D @pinia/testing

npm i -D @pinia/testing

And make sure to create a testing pinia in your tests when mounting a component:

import { mount } from '@vue/test-utils'
import { createTestingPinia } from '@pinia/testing'
// import any store you want to interact with in tests
import { useSomeStore } from '@/stores/myStore'

const wrapper = mount(Counter, {
  global: {
    plugins: [createTestingPinia()],
  },
})

const store = useSomeStore() // uses the testing pinia!

// state can be directly manipulated
store.name = 'my new name'
// can also be done through patch
store.$patch({ name: 'new name' })
expect(store.name).toBe('new name')

// actions are stubbed by default, meaning they don't execute their code by default.
// See below to customize this behavior.
store.someAction()

expect(store.someAction).toHaveBeenCalledTimes(1)
expect(store.someAction).toHaveBeenLastCalledWith()

import { mount } from '@vue/test-utils'
import { createTestingPinia } from '@pinia/testing'
// import any store you want to interact with in tests
import { useSomeStore } from '@/stores/myStore'

const wrapper = mount(Counter, {
  global: {
    plugins: [createTestingPinia()],
  },
})

const store = useSomeStore() // uses the testing pinia!

// state can be directly manipulated
store.name = 'my new name'
// can also be done through patch
store.$patch({ name: 'new name' })
expect(store.name).toBe('new name')

// actions are stubbed by default, meaning they don't execute their code by default.
// See below to customize this behavior.
store.someAction()

expect(store.someAction).toHaveBeenCalledTimes(1)
expect(store.someAction).toHaveBeenLastCalledWith()

Please note that if you are using Vue 2, @vue/test-utils requires a slightly different configuration.

Initial State

You can set the initial state of all of your stores when creating a testing pinia by passing an initialState object. This object will be used by the testing pinia to patch stores when they are created. Let's say you want to initialize the state of this store:

import { defineStore } from 'pinia'

const useCounterStore = defineStore('counter', {
  state: () => ({ n: 0 }),
  // ...
})

import { defineStore } from 'pinia'

const useCounterStore = defineStore('counter', {
  state: () => ({ n: 0 }),
  // ...
})

Since the store is named "counter", you need to add a matching object to initialState:

// somewhere in your test
const wrapper = mount(Counter, {
  global: {
    plugins: [
      createTestingPinia({
        initialState: {
          counter: { n: 20 }, // start the counter at 20 instead of 0
        },
      }),
    ],
  },
})

const store = useSomeStore() // uses the testing pinia!
store.n // 20

// somewhere in your test
const wrapper = mount(Counter, {
  global: {
    plugins: [
      createTestingPinia({
        initialState: {
          counter: { n: 20 }, // start the counter at 20 instead of 0
        },
      }),
    ],
  },
})

const store = useSomeStore() // uses the testing pinia!
store.n // 20

Customizing behavior of actions

createTestingPinia stubs out all store actions unless told otherwise. This allows you to test your components and stores separately.

If you want to revert this behavior and normally execute your actions during tests, specify stubActions: false when calling createTestingPinia:

const wrapper = mount(Counter, {
  global: {
    plugins: [createTestingPinia({ stubActions: false })],
  },
})

const store = useSomeStore()

// Now this call WILL execute the implementation defined by the store
store.someAction()

// ...but it's still wrapped with a spy, so you can inspect calls
expect(store.someAction).toHaveBeenCalledTimes(1)

const wrapper = mount(Counter, {
  global: {
    plugins: [createTestingPinia({ stubActions: false })],
  },
})

const store = useSomeStore()

// Now this call WILL execute the implementation defined by the store
store.someAction()

// ...but it's still wrapped with a spy, so you can inspect calls
expect(store.someAction).toHaveBeenCalledTimes(1)

Specifying the createSpy function

When using Jest, or vitest with globals: true, createTestingPinia automatically stubs actions using the spy function based on the existing test framework (jest.fn or vitest.fn). If you are not using globals: true or using a different framework, you'll need to provide a createSpy option:

vitestsinon

// NOTE: not needed with `globals: true`
import { vi } from 'vitest'

createTestingPinia({
  createSpy: vi.fn,
})

// NOTE: not needed with `globals: true`
import { vi } from 'vitest'

createTestingPinia({
  createSpy: vi.fn,
})

import sinon from 'sinon'

createTestingPinia({
  createSpy: sinon.spy,
})

import sinon from 'sinon'

createTestingPinia({
  createSpy: sinon.spy,
})

You can find more examples in the tests of the testing package.

Mocking getters

By default, any getter will be computed like regular usage but you can manually force a value by setting the getter to anything you want:

import { defineStore } from 'pinia'
import { createTestingPinia } from '@pinia/testing'

const useCounterStore = defineStore('counter', {
  state: () => ({ n: 1 }),
  getters: {
    double: (state) => state.n * 2,
  },
})

const pinia = createTestingPinia()
const counter = useCounterStore(pinia)

counter.double = 3 // 🪄 getters are writable only in tests

// set to undefined to reset the default behavior
// @ts-expect-error: usually it's a number
counter.double = undefined
counter.double // 2 (=1 x 2)

import { defineStore } from 'pinia'
import { createTestingPinia } from '@pinia/testing'

const useCounterStore = defineStore('counter', {
  state: () => ({ n: 1 }),
  getters: {
    double: (state) => state.n * 2,
  },
})

const pinia = createTestingPinia()
const counter = useCounterStore(pinia)

counter.double = 3 // 🪄 getters are writable only in tests

// set to undefined to reset the default behavior
// @ts-expect-error: usually it's a number
counter.double = undefined
counter.double // 2 (=1 x 2)

Pinia Plugins

If you have any pinia plugins, make sure to pass them when calling createTestingPinia() so they are properly applied. Do not add them with testingPinia.use(MyPlugin) like you would do with a regular pinia:

import { createTestingPinia } from '@pinia/testing'
import { somePlugin } from '../src/stores/plugin'

// inside some test
const wrapper = mount(Counter, {
  global: {
    plugins: [
      createTestingPinia({
        stubActions: false,
        plugins: [somePlugin],
      }),
    ],
  },
})

import { createTestingPinia } from '@pinia/testing'
import { somePlugin } from '../src/stores/plugin'

// inside some test
const wrapper = mount(Counter, {
  global: {
    plugins: [
      createTestingPinia({
        stubActions: false,
        plugins: [somePlugin],
      }),
    ],
  },
})

E2E tests

When it comes to Pinia, you don't need to change anything for E2E tests, that's the whole point of these tests! You could maybe test HTTP requests, but that's way beyond the scope of this guide 😄.

Unit test components (Vue 2)

When using Vue Test Utils 1, install Pinia on a localVue:

import { PiniaVuePlugin } from 'pinia'
import { createLocalVue, mount } from '@vue/test-utils'
import { createTestingPinia } from '@pinia/testing'

const localVue = createLocalVue()
localVue.use(PiniaVuePlugin)

const wrapper = mount(Counter, {
  localVue,
  pinia: createTestingPinia(),
})

const store = useSomeStore() // uses the testing pinia!

import { PiniaVuePlugin } from 'pinia'
import { createLocalVue, mount } from '@vue/test-utils'
import { createTestingPinia } from '@pinia/testing'

const localVue = createLocalVue()
localVue.use(PiniaVuePlugin)

const wrapper = mount(Counter, {
  localVue,
  pinia: createTestingPinia(),
})

const store = useSomeStore() // uses the testing pinia!

Testing stores ​

Unit testing a store ​

Unit testing components ​

Initial State ​

Customizing behavior of actions ​

Specifying the createSpy function ​

Mocking getters ​

Pinia Plugins ​

E2E tests ​

Unit test components (Vue 2) ​